Avaliação da profundidade da cárie proximal nos exames radiográfico convencional e digitalizado / Evaluation of the size of proximal caries in radiography and digitized

Introdução: A cárie dentária é uma doença multifatorial que compreende vários fatores biológicos e sociais. A superfície proximal dos dentes é uma região de difícil visualização que pode esconder pequenas lesões cariosas no esmalte dentário, impossibilitando o diagnóstico através de inspeções visuais e táteis. Objetivo: O objetivo deste trabalho foi avaliar a profundidade da cárie proximal nos exames radiográficos convencionais e digitais, comparando as profundidades das lesões consideradas nestes exames às do exame histológico. Método: Foram utilizados exames radiográficos interproximais de 40 dentes humanos, 20 pré-molares e 20 molares, com alterações clínicas em uma das superfícies proximais, como lesões de mancha branca ou acastanhada e pequenas cavitações. Três profissionais especializados em radiologia odontológica com mais de cinco anos de experiência clínica mediram a profundidade das lesões pelos exames radiográfico e digital das amostras. Para obter os resultados, utilizou-se a técnica de análise de variância (ANOVA). Resultados: Constatou-se um nível de significância de 5% nas mensurações dos exames radiográficos convencionais e digitalizados, mostrando a fidelidade das imagens radiográficas em relação a real profundidade da lesão. Conclusão: Conclui-se que os exames de imagem avaliados foram eficientes na determinação da profundidade das lesões de cárie proximal.

Introduction: Dental caries is a multifactorial disease that comprises several biological and social factors. The proximal surface of the teeth is a region of difficult visualization that can hide small carious lesions in the dental enamel, making diagnosis through visual and tactile inspection infeasible. Objective: The objective of this study was to evaluate the depth of proximal caries in the conventional and digitized radiographic examinations, comparing the depths of the lesions considered in these examinations to those of the histological examination. Method: Interproximal radiographic examinations of 40 human teeth, 20 premolars and 20 molars, with clinical alterations on one of the proximal surfaces, such as white or brown spot lesions and small cavitations, were used. Three professionals specialized in dental radiology with more than five years of clinical experience measured the depth of the lesions by radiographic examination of the samples. To obtain the results, we used the technique of analysis of variance (ANOVA). Results: A level of significance of 5% was found in conventional and digitized radiographic measurements, showing the fidelity of the radiographic images in relation to the actual depth of the lesion. Conclusion: It was concluded that the imaging tests evaluated were efficient in determining the depth of proximal caries lesions.

Angle class II/2nd division: is there an alignment? / Classe II/2ª divisão de Angle: existe alinhamento?

Introduction: Interdisciplinary investigative study of the stomatognathic-cervical complex, necessary to understand the structure and biomechanics of this system in Angle Class I and II / 2nd Division participants. Objective: To evaluate alignment and position of cranial cervical structures on radiographs and their functional relationship with the stomatognathic system. Material and method: Trans Oral and Profile radiographs were submitted to biomechanical analysis, considered the linear and angular measurement of Atlas and Axis through the application included in the radiogram software. Result: We observed a significant difference in the angular measurements of vertical alignment between the Skull, Axis, and the Mandible (p = <0.001), and in the left joint between the Atlas and the Axis (AE: p = 0.011; SEA: p = 0.042). Among the linear measures of the distances between the Atlas and the Axis, the AOD distance presented statistics quite close to the level of significance (p = 0.0502), but above. There was no statistically significant difference in the other measures. Conclusion: In this study, the alignment between the Atlas and Axis cervical vertebrae and the mandible and angles of the atlanto-occipital joints are altered in Class II / 2nd Division participants. There is no difference in the size and distance of the Atlas and the Axis between the Classes.

Introdução: Estudo interdisciplinar investigativo do complexo cérvico-estomatognático, necessário para compreender a estrutura e a biomecânica desse sistema em participantes Classe I e II/2ª Divisão de Angle. Objetivo: Avaliar o alinhamento e a posição das estruturas crânio cervicais nas radiografias de participantes Classe I e II/2ª Divisão de Angle e sua relação funcional com o sistema estomatognático. Material e método: As imagens digitais Trans Oral e Perfil de participantes com maloclusão Classe I e II/2ª Divisão de Angle foram submetidas à medição linear e angular do crânio, mandíbula, Atlas e do Áxis através do software Advantage Workstation 4.6 (AW4.6 ext. 04). Resultado: Houve diferença significativa nas medidas angulares de alinhamento vertical entre o Crânio, Áxis e a Mandíbula (p = <0,001), e da articulação esquerda entre o Atlas e o Áxis (AE: p = 0,011; AAE: p = 0,042). Das medidas lineares das distâncias entre o Atlas e o Áxis, a distância AOD apresentou estatística bastante próxima do nível de significância (p=0,0502), porém acima. Não houve diferença significativamente estatística nas demais medidas avaliadas. Conclusão: Neste estudo, o alinhamento entre as vértebras cervicais Atlas e Áxis e a mandíbula e os ângulos das articulações atlanto occipitais se mostraram alterados nos participantes Classe II/2ª Divisão de Angle. Não há diferença significativa no tamanho e distância do Atlas e do Áxis entre as Classes.

Comparison Between Radiographs, White and Fluorescent Images in the Diagnosis and Treatment Decisions for Occlusal Caries: An Ex Vivo Study

ABSTRACT Objective: To compare the agreement of images in white light (WL), fluorescence (FL), and digital radiographs (DR), on the diagnosis and treatment decisions for occlusal caries lesions against a micro-CT gold standard. Material and Methods: Ten extracted third molars, with enamel and/or dentin caries (ICDAS 2-4), were included. Occlusal surface images were acquired with an intraoral camera (SoproLife®) in WL and FL modes. DR was obtained using an intraoral X-ray and a semi-direct digital system. A total of 780 images were needed, organized in a template, to be later examined by twenty-six dentists invited to compose the study. The Generalized Estimation Equations model was used to compare the proportions of the correct answers between the three methods and the gold standard. When significant, Bonferroni post-hoc test was used to identify differences (α=5%). Results: Most of the examiners were specialists (76.9%) with 14.5 years of experience. All diagnostic methods were similar and showed low agreement (DR 12.7%, WL 16.5%, and FL 16.5%) compared with gold standard caries diagnostic scores. Regarding treatment decisions, mean agreement for all diagnostic methods was higher (43.2%; p<0.001), and among all methods, WL (48.1%) and FL (51.2%) modes performed better than DR (30.4%, p<0.001). Conclusion: SoproLife® images could help clinicians to propose rational, minimally invasive treatments for occlusal caries lesions.

Concordância entre medida de comprimento de trabalho por radiografia e localizador eletrônico foraminal na dentição decídua: revisão integrativa / Agreement between work length measurement by radiography and electronic foraminal locator in the primary dentition: an integrative review

Introdução: O estabelecimento do comprimento de trabalho (CT) é uma etapa fundamental para o sucesso do tratamento endodôntico, principalmente na dentição decídua. O exame radiográfico é um dos principais meios de definir o CT. A mensuração desse comprimento também pode ser obtida por meio de dispositivos eletrônicos. Objetivo: Revisar a literatura acerca da concordância entre a medida de CT por radiografia e localizadores eletrônicos foraminais (LEFs) na dentição decídua. Metodologia: A busca bibliográfica foi realizada nas bases de dados PubMed, Cochrane Library e BVS, seguindo uma estratégia de combinação de palavras-chave, filtrando apenas pesquisas clínicas. A seleção dos artigos foi realizada em duas etapas: através da leitura dos títulos e resumos e, em seguida, por meio da obtenção e leitura dos artigos completos selecionados. Resultados: sete artigos foram selecionados, publicados entre 2011 e 2020. Todos foram analisados quanto à qualidade metodológica e à caracterização como tamanho da amostra, objetivo, metodologia, resultados e conclusão. Todos possuíam os dados necessários para contemplar o objetivo desta pesquisa. O uso dos LEFs mostrou-se tão preciso quanto o método radiográfico (n=6), e, em um estudo, o método eletrônico foi superior ao radiográfico para determinação do CT. Conclusão: O método eletrônico possui eficácia na determinação do CT durante o tratamento endodôntico de dentes decíduos sendo comparável ao radiográfico.

Introduction: To establish the working length (CT) is a fundamental step toward the suc-cess of endodontic treatment. Also, the radiographic examination is one of the most important means of determining CT. This length can also be measured by electronic devic-es. Objective: To review the literature on the agreement between the CT measurement by radiography and electronic foraminal locators (LEF) in the primary dentition. Methodology: A bibliographic search was performed on PubMed, Cochrane Library, and BVS, using a keyword combination strategy and filtering only clinical research. The selection of the articles occurred in two stages: by reading the titles and abstracts, and by obtaining and reading the selected full articles. Results: Seven articles, published between 2011 and 2020, were selected and analyzed for methodological quality and characterized for sample size, objectives, methodology, results, and conclusion. They had the essential data to contemplate the purpose of this research. The use of LEF proved to be as accurate as of the radiographic method (n=6), and in one study, the electronic method was superior to the radiographic method for determining TC. Conclusion: The electronic method is effective in determining the CT during the endodontic treatment of primary teeth and is comparable to the radiographic one.

Prevalence of Developmental Dental Anomalies Using Digital Panoramic Radiographs in Libyan Dental Patients

ABSTRACT@#Dental anomalies may occur due to the complex interactions among genetic, epigenetic, and environmental factors during dental development. The current study aimed to determine the prevalence and gender significance of developmental dental anomalies (DDA) in dental patients. This was a cross-sectional study of 260 subjects (123 males and 137 females) with an age range of 6–35 years old. Clinical and radiographic examinations were performed to determine the prevalence of anomalies in tooth number, shape, size, position, and structure. Descriptive statistics was performed, the chi-square test was used for analysis and p-value was set at 0.05. The findings showed that 203 subjects (78.1%) had DDA, which included 86 males (33.1%) and 117 females (45%). A significant gender difference was found regarding the prevalence of two anomalies (p < 0.05). The most prevalent anomaly was displacement 51.2%, followed by dilaceration 24.2%. A significant gender difference (p < 0.05) was found regarding hypodontia 16.5% and impaction 14.6%, with more predominant in females. Some anomalies were not observed such as microdontia, dentin dysplasia, ectopic eruption, gemination, and taurodontism. The study concluded that displacement and dilacerations were the common abnormalities. These findings may lead to various dental complications. Therefore, early diagnosis and follow-up observation are required to reduce the potential dental problems. In addition, it is helpful to increase the knowledge of practitioners with regards to DDA and its occurrence. Furthermore, it is good to highlight the importance of early diagnosis of DDA, especially in the mixed dentition, which can lead to reducing the complication of an orthodontic treatment plan.

Prevalence of incidental dental anomalies seen on pre-treatment digital panoramic radiographs of a group of Nigerian orthodontic patients: A retrospective study

Background: Radiographs are used by orthodontists in the diagnosis of malocclusion, treatment planning and monitoring. These usually reveal presence of dental anomalies that may require further assessment and management. Objective: To investigate the prevalence, types and distribution of dental anomalies seen on the orthopantomograms (OPGs) of orthodontic patients at the University of Port-Harcourt Teaching Hospital (UPTH).Methods: This was a retrospective cross-sectional radiographic study of a cohort of orthodontic patients who presented to the Department of Child Dental Health, University of Port Harcourt Teaching Hospital, Rivers State, Nigeria. The data gathered from digital orthopantomograms of the patients was analysed using IBM Statistical Package for Social Sciences (SPSS) Statistics for Windows version 25.0. Results: The study comprised 249 patients with an age range of 5-44years (mean age of 14.6±7.7years) comprising 108 (43.4%) males and 141 (56.6%) females.Seventy (28.1%) [(29, 41.4% males), (41, 58.6% females)] of the patients had at least one dental anomaly. Dental anomalies were commonest (48, 68.6%) within 10-19 years age bracket followed by the 0-9 years age bracket (11, 15.7%). The most frequent dental anomaly was taurodontism (43, 61.4%), followed by congenitally missing teeth (8, 11.4%), supernumerary teeth (5, 7.1%), odontoma (4, 5.7%), peg shaped lateral incisors and transposition (2, 2.9%) respectively. Dental anomalies were more frequent in the maxilla (43, 61.4%). Conclusion: The most common dental anomaly was taurodontism. Anomalies were more frequent in female than male patients and in the maxilla than in the mandible

Diagnóstico de reabsorção radicular: influência da resolução espacial de captura de imagens digitais periapicais / Root resorption diagnostic: influence of periapical digital image scanning

Introdução: a detecção da reabsorção da raiz dentária é realizada por meio de exames de imagens, pois frequentemente não apresenta sinal e sintoma clínicos. Dentre os exames de imagem disponíveis, o exame radiográfico periapical, é indicado para diagnóstico, prognóstico e acompanhamento da reabsorção radicular. Objetivo: o estudo tem como objetivo investigar a relação de diferentes resoluções espaciais com o diagnóstico de reabsorção radicular. Metodologia: foram realizados desgastes simulando reabsorção externa no terço apical e vestibular de 15 (quinze) incisivos inferiores, radiografados em crânio seco, antes e depois do desgaste. A técnica radiográfica foi realizada utilizando o sistema VistaScan (Durr Dental, Bietigheim-Bissingen, Germany), aparelho CS 2200 (Carestream Dental LLC, Atlanta-GA, USA) usando tempo de exposição de 0,15 segundos e escaneadas sob diferentes protocolos de resolução espacial, a saber, 20 pares de linhas por milímetro (pl/mm) e 40 pl/mm. Posteriormente dois avaliadores experientes fizeram análises das referidas imagens sem conhecimento prévio da resolução de escaneamento. Resultados: 75% das radiografias realizadas com 20 pl/mm foram classificadas como excelentes pelos avaliadores, contra 33% com 40 pl/mm, estatisticamente significativa. Discussão: ao avaliar a reabsorção radicular, obteve-se uma acurácia diagnóstica igual para os dois protocolos sem distinção, estatisticamente significativa, entre localização ou profundidade. Conclusão: tendo em vista que para os examinadores imagens com 20 pl/mm foram satisfatórias, com percentual de qualidade maior quando comparado a imagens obtidas com 40 pl/ mm, este estudo indica o emprego de imagens com 20 pl/mm para avaliação inicial de suspeita de reabsorções nas raízes dentárias.

Introduction: the detection of tooth root resorption is carried out by means of imaging tests, as it often does not present a clinical sign and symptom. Among the imaging tests available, the periapical radiographic examination is indicated for diagnosis, prognosis and monitoring of root resorption. Objective: the study aims to investigate the relationship of different spatial resolutions in the diagnosis of root resorption. Methods: Artificial external root resorptions were simulated using burs by drilling to the entire depth in different locations at the apical and buccal thirds of 15 (fifteen) lower incisors were worn, radiographed on a dry skull, before and after wear. The radiographic technique was performed using the VistaScan system (Durr Dental, Bietigheim-Bissingen, Germany), CS 2200 device (Carestream Dental LLC, Atlanta-GA, USA) using an exposure time of 0.15 seconds and scanned under different resolutions protocols, namely, 20 pairs of lines per millimeters (pl/mm) and 40 pl/mm. Subsequently, two experienced evaluators performed analyzes of these images without prior knowledge of the scanning resolution. Results: seventy-five percent of the radiographs taken at 20 pl/mm were rated as excellent by the evaluators, against 33% at 40 pl/mm, a statistically significant difference. Discussion: When assessing root resorption, a similar diagnostic accuracy was obtained for the two protocols without a statistically significant distinction between location or depth. Conclusions: Considering that for examiners images with 20 pl/mm were satisfactory, with a percentage of quality greater than 40 pl/mm, this study indicates the use of 20 pl/mm for initial evaluation of suspected root resorption.

Análise comparativa da precisão de medição dos localizadores apicais eletrônicos Romiapex a15® e Root zx mini®: um estudo in vitro / Comparative analysis of the measuring accuracy of the electronic apex locators Romiapex a15® and Root zx mini®: an in vitro study

Este estudo analisou a precisão de medição dos aparelhos ROMIAPEX A 15® e ROOT ZX MINI®, in vitro, comparativamente pelo método radiográfico e eletrônico no que diz respeito à precisão e confiabilidade na determinação do Comprimento Real de Trabalho (CRT) e Comprimento Real do Dente (CRD). Vinte dentes humanos (incisivos superiores e pré-molares superiores/inferiores) foram avalia das e seus CRD's e CRT's aferidos de forma direta por meio de lima tipo k nº 10 ou 15 (Dentsply Sirona, Ballaigues, Suíça), pelo método radiográfico e método eletrônico. Não foram verificadas diferenças significativas entre as medidas para CRD (p=0,003) e CRT (p=0,042) entre os métodos direto, radio gráfico e eletrônico. Ambos os métodos ficaram próximos da medida real, quando por vezes também definiram a mesma medida real. Os CRD's obtidos pelos métodos radiográfico e eletrônico foram sub metidos ao Teste t de Student (p<0,024) apontando relação estatística significativa para a verificação da odontometria, sugerindo que ambos os métodos são eficazes na determinação do comprimento real do dente quanto de trabalho. O método eletrônico apresentou eficácia satisfatória estatistica mente nos casos comparativamente aos outros métodos também avaliados. Os dados sugerem que os localizadores citados podem auxiliar as tomadas de decisões para determinação do CRD e CRT

This study analyzed the measurement accuracy of the ROMIAPEX A15® and ROOT ZX MINI® locators, in vitro, comparatively by the radiographic and electronic methods with regard to the precision and reliability in the determination of the Real Working Length (RWL) and Real Tooth Length (RTL). Twenty human teeth (upper incisors and upper/lower premolars) were evaluated it had the RTL and RWL measured through rasp k No 10/15 (Dentsply Sirona, Ballaigues, Switzerland) by radiographic and electronic methods. There were no significant differences between the measures for RTL (p = 0,003) and RWL (p = 0,042) for the methods. It means that both methods were very close to the real measure, when sometimes they also defined the same real measure. The RTL obtained by methods radiographic and electronic, were submitted to Student's t test (p <0,024), showed statistical significance in relation to the methods used for verification of odontometry, which means that both methods are effective to determine an actual length of the element and the length of actual work. The electronic method showed statistically satisfactory effectiveness in the cases compared to the other methods.The data suggest that these locators can assist decision making to determine RTL and RWL ... (AU)

Detección y cuantificación de células plasmáticas (plasmocitos) en granulomas periapicales inducidos experimentalmente en ratas / Detection and quantification of plasma cells in experimentally induced rat periapical granulomas

Objetivo: En los granulomas periapicales, los plasmocitos (PL) participan activamente mediante la liberación de inmunoglobulinas. El propósito de este ensayo fue identificar y contar el número de PL en diferentes períodos de tiempo en lesiones periapicales experimentales en ratas. Materiales y métodos: Mediante la exposición al medio oral de la pulpa de los primeros molares inferiores izquierdos, se indujeron granulomas periapicales en ratas a las que previamente se les suministró anestesia. La pulpa de los primeros molares inferiores derechos no fue expuesta, y estos dientes se utilizaron como control. Los animales fueron eutanasiados a los 10, 30 y 60 días de la exposición. Los maxilares inferiores fueron removidos, y los primeros molares, junto con los tejidos circundantes, se procesaron para su estudio histológico. Se obtuvieron secciones semiseriadas, posteriormente coloreadas con verde de metilo-pironina (VMP). Cada tres secciones, las tres siguientes fueron coloreadas con hematoxilina y eosina (H-E). Los controles también fueron coloreados con H-E. Resultados: Todos los especímenes experimentales coloreados con H-E revelaron la presencia de granulomas periapicales. Luego de la exposición pulpar, el número de PL que reaccionó positivamente al VMP se incrementó de manera progresiva desde el día 10 hasta los días 30 y 60. A pesar de que a los 60 días el número de PL fue ligeramente menor que a los 30 días, no hubo diferencias estadísticamente significativas entre estos dos períodos. Los especímenes del grupo control coloreados con H-E mostraron que los tejidos periapicales se encontraban dentro de los parámetros normales en todos los períodos de observación. Conclusiones: Los resultados de este estudio revelaron que el número de plasmocitos VMP positivos se incrementa progresivamente en función del tiempo transcurrido pero se estabiliza al finalizar el experimento. También sugieren que el empleo de la coloración de VMP es un procedimiento adecuado para la identificación y la cuantificación de plasmocitos en los granulomas periapicales inducidos experimentalmente en ratas (AU)

Aim: Plasma cells (PL) release immunoglobulin in periapical lesions. The purpose of this assay was to identify and count the number of plasmocytes observed in periapical lesions in rats. Materials and methods: By exposing the pulp of the lower left first molars to the oral environment, periapical granulomas were induced in rats previously anesthetized. The pulp of right mandibular first molars was not exposed and these teeth were used as negative controls. The animals were euthanized at 10, 30 and 60 days after pup exposure. The mandibles were removed and specimens of the molar teeth along with the surrounding tissues were prepared for histology. Semi serial sections of the left first molar were stained with methyl green pyronine (MGP). Every three sections, the following three sections were stained with hematoxilyn and eosin (H-E). Negative control samples were stained with H-E. Results: All the H-E stained experimental samples revealed the presence of periapical granulomas. After pulp exposure, the number of PL increased from day 10 to 30 and 60. In the 60-day samples the number of PL was slightly less than that of the 30-day samples, with no statistically significant difference. The H-E stained control samples showed normal periapical tissues in all observation periods. Conclusions: The results of this study revealed that the number of VMP positive PL, increased progressively with time but it was stabilized at the end of the experiment. In addition, the results suggest that the use of VMP stain is a suitable procedure for the identification and counting of PL in experimentally induced periapical granulomas in rats (AU)

Comparación entre trazados cefalométricos manual y digital en radiografías laterales del cráneo / Comparison between Manual and Digital Cephalometric Tracing in Side Radiographies of the Skull

Resumen Objetivo: Evaluar la diferencia del trazado cefalométrico manual con el digital en radiografías laterales de cráneo. Materiales y métodos: Inicialmente se realizó un piloto para calibrar al investigador principal, en donde se analizaron 10 radiografías pertenecientes a cinco pacientes del Servicio de Radiología del Centro Odontológico de nuestra institución para evaluar la concordancia entre los dos evaluadores y establecer el tamaño de la muestra. Finalmente, se analizaron 78 radiografías cefalométricas de 39 pacientes, en las que se realizó el trazado cefalométrico de Steiner manual y digital. Esas radiografías se analizaron en una escala 1:1 y posteriormente se evaluó la diferencia de las mediciones mediante el análisis univariado, se determinó en mediana e intervalo intercuartil por separado. En el análisis bivariado, se aplicó la prueba de signo de rangos de Wilcoxon y muestras pareadas para determinar la diferencia de las mediciones cefalométricas de Steiner entre el tipo del análisis cefalométrico. El nivel de significancia se fijó en p < 0,05 y confiabilidad al 95%, respectivamente. Resultados: No hubo diferencia significativa en la mayoría de las mediciones hechas de manera manual y digital, siendo el ángulo interincisal la única medición angular en la cual hubo diferencia significativa al obtener un resultado de p = 0,002. Mientras tanto, en las mediciones lineales, la única medición en la que hubo diferencia significativa fue en el segmento incisivo inferior - NB con p = 0,005. Conclusión: No se encuentran diferencias significativas entre el trazado cefalométrico manual y el digital. No obstante, es importante tener en cuenta que la muestra o población evaluada es reducida para definir conclusiones.

Abstract Objective: To evaluate the difference of the manual cephalometric tracing with the digital tracing on lateral cranial radiographs. Materials and Methods: Initially, a pilot study was carried out to calibrate the principal investigator, where 10 radiographs belonging to 5 patients of the Radiology Service of the Dental Center, were analyzed to evaluate the intraclass concordance between the two evaluators. To establish the size of the sample, finally, 78 cephalometric radiographs of 39 patients were analyzed, in which the manual and digital Steiner cephalometric tracing was performed. These radiographs were analyzed on a 1: 1 scale and then the difference of the measurements was evaluated using the univariate analysis, which was determined in the median and interquartile range, separately. In the bivariate analysis, the Wilcoxon rank sign test and paired samples were applied to determine the difference of Steiner's cephalometric measurements between the cephalometric analysis type. The level of significance was set at p < 0.05 and 95% reliability, respectively. Results: There was no significant difference in most of the measurements made manually and digitally. The interincisal angle the only angular measurement in which there was a significant difference when obtaining a result of p = 0.002, while, in the linear measurements, the only measurement in which there was significant difference was in the lower incisor segment - NB with p = 0.005. Conclusion: There is no significant difference between manual and digital cephalometric tracing, nevertheless it is important to keep in mind that the simple or population evaluated is reduced to define conclusions.

Comparative study on radio-opacity of dental composite resin materials'determination using film imaging and digital imaging / 北京大学学报(医学版)

OBJECTIVE@#To compare the effects of different imaging methods on radio-opacity. Digital imaging and traditional film imaging were used to determine the radio-opacity of dental composite resin materials.@*METHODS@#Fourteen dental composite resins commonly used in clinic were prepared for disc samples with thickness of 1 mm and diameter of 15 mm respectively. The aluminum step wedge was used as the reference and the disc samples were irradiated with X-rays by the traditional film imaging, phosphor imaging plate and charge-coupled device(CCD) intra-oral X-ray sensor respectively. Exposure was set at 65 kV and 7 mA, with 300 mm focus to film distance and the exposure time was 0.25 s. After developing and fixing the film, the optical density of the image of the sample and that of each step of the aluminum step wedge were measured using the densitometer. The digital image file was exported to grey scale analysis software of Adobe Photoshop® to measure the average grey value in the sample image and aluminum step wedge image. The curves were drawn corresponding to the optical density/gray value of each step of the aluminum step wedge and its thickness, and the equivalent thickness of the aluminum plate was calculated according to the optical density/gray value of the actual measured thickness of the sample, so as to evaluate the radio-opacity of dental composite resin material.@*RESULTS@#For the same sample, the aluminum equivalent measured by traditional film imaging and two other digital imagings had significant differences among the 14 composite resins (P < 0.05), and the aluminum equivalent measured by the two digital imagings were greater than that of the traditional film. Moreover the aluminum equivalent measured by the two digital imagings was also different, and the aluminum equivalent measured by the CCD intra-oral X-ray sensor in most composite resins was larger than that measured by phosphor imaging plate. The same sample was photographed with the same imaging method, and the aluminum equivalent was different after three exposures. The standard deviation of aluminum equivalent measured by phosphor imaging plate was the largest, while that measured by CCD intra-oral X-ray sensor was the smallest. Among the 14 dental composite resin materials, the aluminum equivalent of Tetric N-Ceram and Te-Econom Plus measured by traditional film imaging and phosphor imaging plate was significantly higher than other composite resins.@*CONCLUSION@#Based on clinical significance, three kinds of sensors designed to measure the radio-opacity of dental composite resin, the value of aluminum equivalent will change according to different types of sensors. The aluminum equivalent measured by CCD intra-oral X-ray sensor was higher than that measured by phosphor imaging plate, and the aluminum equivalent measured by phosphor imaging plate was higher than that measured by traditional film imaging. Moreover, even though the same sensor was used, the aluminum equivalent measured by multiple exposures was different. The standard deviation of the aluminum equivalent measured by phosphor imaging plate was greater than that measured by traditional film imaging and CCD intra-oral X-ray sensor. The three sensors in this study could be used for evaluating the radio-opacity of dental composite resin materials. But no matter what kind of sensor was used to measure the radio-opacity of dental composite resin, it complied to ISO 4049: 2019 standard, the materials were suitable for clinical use.

Comparison of the diagnostic accuracy of cone beam computed tomography and three intraoral radiographic systems in the diagnosis of carious lesions in vitro / Comparación de la precisión diagnóstica de la tomografía computarizada de haz cónico y tres sistemas radiográficos intraorales en la detección de lesiones de caries in vitro

Objective: The objective of the study was to compare the diagnostic accuracy of cone beam computed tomography and three intraoral radiographic systems in the detection of in vitro caries lesions. Material and Methods: One hundred teeth (46 molars and 54 premolars) were evaluated, including 176 proximal surfaces and 90 occlusal surfaces, with or without dental caries lesions. Digital images of all teeth were obtained using specific intraoral radiographs, VistaScan DürrDental®phosphor-plate radiography, XIOS XG Sirona® digital sensor radiography, and CBCT I-CATTM. Observers evaluated the images for the detection of caries lesions. The teeth were clinically sectioned and stereomicroscopy served as a validation tool. The relationship of sensitivity and specificity between all systems was determined through the ROC curve using Az values. Results: The values of the area under the curve (Az) selected for the CBCT I-CATTM system were 0.89 (0.84-0.93), for conventional radiography 0.71 (0.66-0.76), digital sensor radiography 0.74 (0.70-0.78) and digital radiography with phosphor-plates 0.73 (0.69-0.77). Statistically significant differences were found between the CBCT I-CATTM system and intraoral radiographic systems (p<0.01). The sensitivity and specificity values for the CBCT I-CATTM were 0.84 and 0.93 respectively. Conclusion: CBCT has a high sensitivity and specificity compared to intraoral radiographic systems for the diagnosis of dental caries lesions in vitro.

Objetivo: El objetivo del estudio fue comparar la precisión diagnóstica de la tomografía computarizada de haz cónico y tres sistemas radiográficos intraorales en la detección de lesiones de caries in vitro. Material y Métodos: Se evaluaron 100 dientes, 46 molares y 54 premolares; 176 superficies proximales y 90 superficies oclusales, con o sin lesión de caries dental. Se obtuvieron imágenes digitales de todos los dientes utilizando radiografías intraorales convencionales, radiografía con placas de fósforo VistaScan DürrDental®, radiografía con sensor digital XIOS XG Sirona® y CBCT I- C ATTM. Tres observadores evaluaron las imágenes para la detección de lesiones de caries. Los dientes se seccionaron clínicamente y la estereomicroscopía sirvió como herramienta de validación. Se determinó relación de sensibilidad y especificidad entre todos los sistemas a través de la curva ROC utilizando valores Az. Resultados: Los valores de área debajo de la curva (Az) obtenidos para el sistema CBCT I-CATTM fueron de 0.89 (0.84-0.93), para radiografía convencional 0.71 (0.66-0.76), radiografía con sensor digital 0.74 (0.70-0.78) y radiografía digital con placas de fósforo 0.73 (0.69-0.77). Se encontró diferencias estadísticamente significativas entre el sistema CBCT I-CATTM y todos los sistemas radiográficos convencionales y digitales (p<0.01). Los valores de sensibilidad y especificidad para el CBCT I-CATTM fueron 0.84 y 0.93 respectivamente. Conclusión: La CBCT tiene una alta sensibilidad y especificidad en comparación a los sistemas radiográficos intraorales en el diagnóstico de lesiones de caries dental in vitro.

Análisis de concordancia entre trazado cefalométrico manual y cefalométrico digital con programa Nemoceph / Analysis of concordance between manual cephalometric and digital cephalometric tracing with Nemoceph program

La importancia del análisis cefalométrico dentro del diagnóstico en ortodoncia ha ido incrementando a través de los años, por ello, el interés de comparar la confiabilidad de los sistemas digitales con el trazado manual convencional. Objetivo: Definir el grado de concordancia entre los resultados de trazado cefalométrico manual y con Nemoceph. Material y métodos: Se utilizaron ocho medidas lineales y angulares del análisis cefalométrico de Steiner. Se realizó un estudio transversal, correlacional, en el cual se analizaron 70 radiografías laterales de cráneo digitales. Los resultados se dividieron en dos grupos, trazado manual y trazado cefalométrico con Nemoceph, los cuales fueron evaluados con un índice de correlación intraclase. Conclusión: Se reportó un grado de correlación intraclase mayor a 0.75, estableciendo que el sistema digital exhibe la misma precisión del manual, con algunas ventajas convenientes a la época (AU)

The importance taken by the cephalometric analysis within the orthodontic diagnosis has been increasing over the years, for that reason the interest of comparing the reliability of the digital systems with the conventional manual tracing. Objective: To define the degree of concordance between the results of manual cephalometric tracing and with Nemoceph. Material and methods: Eight linear and angular measurements of Steiner's cephalometric analysis were used. A crosssectional, correlational study was conducted in which 70 digital skull lateral radiographs were analyzed. The results were divided into two groups; manual tracing and cephalometric tracing with Nemoceph, which were evaluated with an intraclass correlation index. Conclusion: a correlation degree greater than 0.75 was reported. Establishing that the digital system exhibits the same precision of the manual, with some advantages suited to the age (AU)

Radiographic Diagnosis of Simulated External Root Resorption in Multi-Rooted Teeth: The Influence of Spatial Resolution / Diagnóstico radiográfico de reabsorção externa simulada em dentes multiradiculares: influência da resolução especial

ABSTRACT The aim of this study was to evaluate the influence of spatial resolution (line pairs per millimetre - lp/mm) on the diagnosis of simulated external root resorption (ERR) in multirooted teeth by using digital periapical radiography. Forty human mandibular molars (80 roots) were used. The roots were divided into the following groups (n = 10): control without root filling (WORF), control with root filling (WRF), small ERRWORF, small ERRWRF, moderate ERRWORF, moderate ERRWRF, extensive ERRWORF and extensive ERRWRF. Four digital radiographs (phosphor storage plates - PSP system) were taken of each tooth in three angulations. The PSPs were scanned with 10, 20, 25 and 40 lp/mm. All images were assessed by three endodontists who used a fivepoint scale for presence and absence of ERR and classified its location (cervical, middle or apical third). ROC curves and oneway ANOVA were performed (p < 0.01). Diagnosis of ERR in nonrootfilled teeth showed higher values of sensitivity for 20 lp/mm and higher values of both specificity and accuracy for 40 lp/mm. In rootfilled teeth, sensitivity and accuracy were higher for 25 lp/mm and spatial resolution had no influence on specificity. The best resolution for diagnosis of small and extensive ERR was 25 lp/mm, whereas for moderate ERR, it was 40 lp/mm. Cervical ERR was the most difficult to diagnose, regardless of the spatial resolution. Higher spatial resolutions have improved the radiographic diagnosis of simulated ERR in multirooted teeth and this should be considered when performing digital radiographs.

RESUMO O objetivo deste estudo foi avaliar a influência do número de pares de linhas em radiografia intraoral digital, na precisão da detecção de reabsorção radicular externa. Quarenta molares inferiores (n=80 raízes) foram submetidos ao preparo químico mecânico e em então, metade da amostra foi obturada. Em seguida, as raízes dos dentes foram aleatoriamente divididas de acordo com o tamanho da reabsorção radicular a ser simulada e com a presença e ausência de tratamento endodôntico. As RRE foram realizadas com brocas esféricas diamantadas de tamanhos 1/2, 1, 2. Executouse radiografias digitais por meio do sistema de aquisição semidireto com a utilização de placas de fósforo fotoestimuladas (PSP). Em cada dente, incidências orto, mésio e distorradial foram repetidas quatro vezes, para que pudessem ser digitalizadas com resoluções de 10, 20, 25, 40 pl/mm. Após análise, verificouse que dentes obturados apresentaram menores valores de sensibilidade com 10, 20 e 25 pl/mm e maiores valores de especificidade e acurácia para as mesmas resoluções. Dentes sem obturação registraram maiores valores de sensibilidade para resolução 20 e menor para 40; no entanto, a especificidade e a acurácia, foram maiores com 40 e menores em 10. Em RRE pequena, as resoluções 10 e 25 pl/mm foram respecti vamente menos e mais acuradas; RRE média, foi maior com 40 pl/mm e RRE grandes foram melhores identificadas com 25. Correlacionando acertos no diagnóstico com localização das RRE, verificouse que o terço cervical apresentouse menos detectável. Concluiuse que resolução espacial influenciou a detecção de RRE simuladas em radiografias periapicais digitais.

Estimación de edad mediante la relación área pulpa/diente en caninos mandibulares: estudio en una muestra chilena utilizando el Método de Cameriere / Dental age estimation by pulp/tooth ratio in mandibular canines: study in a Chilean sample by Camerierer's Method

La estimación de edad compone un aspecto importante en investigaciones forenses. Diferentes métodos se han descrito en odontología forense basadas en la correlación entre la edad y estructuras dentales. Cameriere et al. proponen un método cuantitativo para estimación de edad en adultos, a partir de la evaluación de la relación del área pulpa/diente, en base a la aposición de dentina secundaria. El objetivo del estudio fue desarrollar modelos de regresión para la estimación de edad dental mediante la relación área pulpa/diente en caninos inferiores en una muestra Chilena. Se analizaron 212 radiografías periapicales digitales (RPD) (86 hombres y 126 mujeres) de caninos mandibulares mediante el programa Image J para establecer el área de la pulpa y el diente. Se registraron los datos de sexo y edad de las RPD seleccionadas en forma ciega. Fueron desarrollados modelos de regresión lineal simples para la estimación de edad. El coeficiente de determinación para R33 fue 27,8 % y de 29,6 % para R44, con un error absoluto medio de 11,02 años y 10,37 años respectivamente. El análisis de ANOVA no mostró diferencias estadísticamente significativas para las relaciones área pulpa/diente de caninos según sexo (p> 0,05). Según los resultados obtenidos, la metodología propuesta por Cameriere et al. es fiable para estimar la edad dental mediante la relación área pulpa/diente en adultos. Sin embargo, en los modelos de regresión desarrollados para la población Chilena, se puede afirmar que el ajuste indicado por los coeficientes de determinación muestran incerteza entre las variables área pulpa/diente y edad cronológica en caninos inferiores, por lo tanto se sugiere considerar otros métodos adicionales para estimar edad en esta población.

Age estimation is an important aspect In forensic investigations. Different methods in forensic odontology based on the correlation between age estimation in adults, from the analysis of the pulp/tooth area, based on the apposition of secondary dentine. The aim of the study was to develop regression models for the dental age estimation by the relation pulp/tooth area, in lower canines in a Chilean sample, using digital peri-apical radiographs (DPR) applying Cameriere's method. We analyzed 212 DPR (86 males and 126 females) mandibular canines through Image J program to measure the pulp/tooth area. Age and sex information was obtained of the DPR's blindly selected. We developed simple linear regression models for age estimation. The coefficient of determination to R33 was R2 age and dental structures have been described. Cameriere et al. proposed a quantitative method for 27.8 % and R2 29.6 % to R44, with a mean absolute error of 11.02 years, to R33 and 10.37 years to R44. ANOVA analysis showed no statistically significant differences for the pulp/tooth relation area of canines according to sex (p> 0.05). According to the results, the Cameriere's et al., method is reliable for dental age estimation according to pulp/tooth ratio in adults. However, in the regression models developed for Chilean population, it can be stated that the adjustment indicated by the coefficients of determination, show uncertainty between the pulp / tooth area and chronological age in lower canines, therefore it is suggested to use additional estimation methods for age in this population.

Influência do torque de inserção, tipo ósseo receptor e perda óssea peri-implantar na estabilidade primária e secundária de implantes cilíndricos hexágono externo e cone morse / Influence of insertion torque, receptor bone type and peri-implant bone loss on the primary and secondary stability of cylindrical external hexagon and morse cone implants

A osseointegração está relacionada à estabilidade do parafuso e influencia a taxa de sucesso de uma reabilitação com próteses implanto-suportadas, pois promove cicatrização natural e formação óssea efetiva, facilitando a preservação do implante no leito receptor. Fatores como a técnica cirúrgica, o torque de inserção, o tipo de osso receptor, e a macro e microestrutura do implante podem influenciar a estabilidade do parafuso. O objetivo deste estudo foi analisar in vivo a influência do torque de inserção, tipo ósseo receptor e perda óssea peri-implantar nos valores do coeficiente de estabilidade do implante (ISQ) de implantes cilíndricos hexágono externo (HE) e cone morse (CM). Foram instalados 43 implantes em áreas edêntulas de 20 pacientes selecionados seguindo critérios de inclusão e exclusão predefinidos. Imediatamente após a instalação dos implantes (t1) foi mensurado o torque de inserção, e foi realizado a análise de frequência de ressonância, a análise radiográfica e a análise peri-implantar. Estas análises foram realizadas novamente após a osseointegração (t2), e os dados obtidos foram analisados estatisticamente, com testes específicos para cada tipo de análise e nível de significância de 5%. Os resultados demonstraram que os valores de ISQ quando mensuradas por meio da análise de frequência de ressonância (AFR) foram similares para implantes cilíndricos HE e CM. A estabilidade destes implantes foi influenciada pelo torque de inserção (torques mais baixos proporcionaram aumento da estabilidade secundária) e tipo ósseo receptor (implantes HE instalados em osso do tipo II e IV e os implantes CM instalados em ossos do tipo II e III apresentaram aumento da estabilidade secundária). Já a perda óssea periimplantar, desde que dentro dos padrões de normalidade, não influenciou na estabilidade primária e secundária destes implantes. Assim, os resultados obtidos neste estudo recomendam que explorar e desenvolver a AFR como método de avaliação da estabilidade implantar deve ser uma busca ainda necessária das pesquisas científicas para melhor compreensão do comportamento dos implantes dentários, nos seus diversos momentos e situações na cavidade oral, bem como determinar um bom nível de estabilidade que consequentemente determinaria uma maior longevidade e funcionalidade dos implantes dentários(AU)

Osseointegration is related to the stability of the screw and influences the success rate of a rehabilitation with implant-supported prostheses, as it promotes natural healing and effective bone formation, facilitating the preservation of the implant in the recipient bed. Factors such as the surgical technique, the insertion torque, the type of recipient bone, and the macro and microstructure of the implant can influence the stability of the screw. The aim of this study was to analyze in vivo the influence of insertion torque, receptor bone type and peri-implant bone loss on the values of the implant stability coefficient (ISQ) of cylindrical external hexagon (HE) and morse cone (CM) implants. 43 implants were installed in edentulous areas of 20 selected patients following predefined inclusion and exclusion criteria. Immediately after installing the implants (t1), insertion torque, resonance frequency, digital periapical radiograph and peri-implant evaluation were measured. These measurements were performed again after osseointegration (t2), and the data obtained were analyzed statistically, with specific tests for each type of analysis and a significance level of 5%. The results showed that the ISQ values when measured using the resonance frequency analysis (AFR) were similar for cylindrical HE and CM implants. The stability of these implants was influenced by the insertion torque (lower torques provided an increase in secondary stability) and bone recipient type (HE implants installed in type II and IV bone and CM implants installed in type II and III bones showed an increase in secondary stability). Peri-implant bone loss, provided that within normal standards, did not influence the primary and secondary stability of these implants. Thus, our studies recommend that exploring and developing AFR as a method of assessing implant stability should be a still necessary search for scientific research to better understand the behavior of dental implants, in their different moments and situations in the oral cavity, as well as determine a good level of stability that consequently would determine greater longevity and functionality of dental implants(AU)

Age estimation in Brazilian adults by Kvaals and Camerieres methods

Abstract The aim of this study was to verify the precision and applicability of two methods of age estimation, Kvaal's and Cameriere's methods, among Brazilian adults. A sample composed of periapical radiographs of canine teeth belonging to 320 Brazilian adults was analyzed, divided into groups according to sex (male and female) and age group (20-29 years, 30-39 years, 40-49 years and 50-59 years). Kvaal's method presented better results when compared to the results of Cameriere's method in the general evaluation of each canine tooth, except for the upper left canine (tooth 23), which presented a mean error (ME) with no statistically significant difference between the methods (Kvaal: ME = 7.43, p = 0.4991, Cameriere: ME = 7.55, p = 0.6982). In the evaluation by age groups, Kvaal's method presented a lower variation between the real age and estimated age when applied to the age groups of 20-29 years and 30-39 years compared to the results provided by Cameriere's method. With respect to the groups aged 40 to 49 years and 50 to 59 years, Cameriere's method presented better performance than the results provided by Kvaal's method. The methods of estimating age proposed by Kvaal and Cameriere are simple and nondestructive and have demonstrated reproducibility and reliability. The Kvaal method was more accurate for the age groups of 20-29 and 30-39 years, and for those over 40 years, the Cameriere method was the most accurate.

Radiopacity of endodontic materials using two models for conversion to millimeters of aluminum

Abstract The aims of the present study were to compare conventional radiography, radiographs digitized with a scanner or photographic camera, and digital radiography, used to evaluate the radiopacity of endodontic materials, and to compare the accuracy of linear and quadratic models used to convert radiopacity values to equivalent millimeters of aluminum (mm Al). Specimens of AH Plus, Endofill, Biodentine and BioMTA materials (n = 8) were radiographed next to an aluminum step-wedge using radiographic films and digital radiography systems (FONA CMOS sensor, Kodak CMOS sensor and photosensitive phosphor plate-PSP). Conventional radiographs were digitized using a scanner or photographic digital camera. Digital images of all the radiographic systems were evaluated using dedicated software. Optical density units (ODU) of the specimens and the aluminum step-wedge were evaluated by a photo-densitometer (PTDM), used in conventional radiographs. The radiopacity in equivalent mm Al of the materials was determined by linear and quadratic models, and the coefficients of determination (R2) values were calculated for each model. Radiopacity of the materials ranged from -9% to 25% for digital systems and digitized radiographs, compared to the PTDM (p < 0.05). The R2 values of the quadratic model were higher than those of the linear model. In conclusion, the FONA CMOS sensor showed the lowest radiopacity variability of the methodologies used, compared with the PTDM, except for the BioMTA group (higher than PTDM). The quadratic model showed higher R2 values than the linear model, thus indicating better accuracy and possible adoption to evaluate the radiopacity of endodontic materials.

Automatic exposure compensation and subjective image enhancement in the radiographic diagnosis of caries

Abstract This study aims to assess the influence of high-density material on the radiographic diagnosis of proximal caries in digital systems with automatic exposure compensation, and to evaluate the effect of subjective adjustment of brightness and contrast to undertake this diagnostic task. Twenty bitewing radiographs of forty posterior human teeth with non-cavitated carious lesions, confirmed by micro-CT, were obtained with two digital systems. A porcelain-fused-to-metal crown attached to a titanium implant was inserted into the exposed area, and all the radiographs were repeated. Five radiologists assessed the radiographs and diagnosed proximal carious lesions. Afterwards, the observers were asked to adjust image brightness and contrast, based on their subjective perception, and to reassess the images. Thirty percent of each experimental group was reassessed to test intraobserver reproducibility, totaling 208 images per observer. Intraobserver and interobserver agreements ranged from fair to substantial. Sensitivity, specificity, predictive values, and area under the ROC curve were calculated and compared for each radiographic system, using ANOVA (α = 0.05). Overall, presence of high-density material and adjustment of brightness and contrast did not significantly influence the radiographic diagnosis of proximal caries (p ≥ 0.05). Regarding Digora Optime, adjustment of brightness and contrast significantly increased (p < 0.05) the diagnostic accuracy of proximal carious lesions in the presence of high-density material. In conclusion, the presence of high-density material in the X-rayed region does not influence radiographic diagnosis of proximal caries. However, when it is present in the X-rayed area, subjective adjustment of brightness and contrast is recommended for use with the Digora Optime digital system.

Physicochemical properties and filling capacity of an experimental iodoform-based paste in primary teeth

Abstract In this study, we evaluated the physicochemical properties (PCP; radiopacity, flow, pH, and solubility) and the quality of root canal filling provided by an experimental industrialized paste (EP), with the same active ingredients as those of the Guedes Pinto paste, compared with the Vitapex® paste. PCP were analyzed according to the ANSI/ADA laboratory testing methods for endodontic filling and sealing materials. To analyze filling capacity, 120 artificial primary teeth (60 maxillary incisors [MIs] and 60 mandibulary molars [MMs]) were endodontically treated. The teeth were divided into eight groups based on the dental group (MIs or MMs), filling material (Vitapex® or EP), and insertion method (syringe or lentulo). The Image J® software was used to analyze the initial an final digital radiographies of each tooth, measuring and comparing root canal and void areas. The percentage of filling failure areas was obtained. Data were submitted to ANOVA and Tukey test of mean comparison. Regarding PCP, both pastes presented results according the ANSI/ADA standards. Flow capacity: Vitapex: 19.6 mm, EP: 25 mm (p < 0.01); radiopacity: Vitapex: 4.47 mmAl, EP: 6.06 mmAl (p < 0.01); pH after 28 days: Vitapex: 7.79, EP: 8.19 (p = 0.12); and solubility after 28 days: Vitapex: 2.68%, EP: 2.89% (p > 0.05). Regarding filling capacity analysis, EP demonstrated 12.5% of failure against 31.5% of Vitapex (p < 0.01). Compared to Vitapex, EP presented statistically significantly better results in flow, radiopacity, pH, and filling capacity. Molars presented more filling failures than incisors. The insertion method using a syringe and a thin tip was significantly better than that using Lentulo spiral carriers.